Çetin Akü

Lithium & Energy Storage

TAB E.MODULE H10.2

TAB E.MODULE H10.2 — Lithium & Energy Storage
51.2V10.2 kWh

The TAB lithium series brings LiFePO4 cell technology, integrated BMS, CAN/RS-485 communication and protection up to IP54 to forklift, caravan, marine and industrial energy storage applications. Fast charging, zero maintenance and up to 3× the cycle life of lead-acid.

Technical Specifications

Series
TAB
Volt
51.2 V
Capacity
10.2 kWh
Dimensions (L×W×H mm)
442 × 165 × 1010 mm
Weight
98 kg
Note
Sürekli akım: 200A · CAN · Aktif soğutma · IP20

Advantages

  • LiFePO4 cell chemistry
  • Integrated BMS with CAN communication
  • Fast charging capability
  • Up to 3× cycle life
  • Modular and scalable architecture

Applications

Electric forkliftsCaravan and marine systemsIndustrial energy storageRenewable energy systems

Product FAQ

The amp-hour (Ah) and cold cranking (CCA) values in your vehicle handbook are the baseline; case type (L1–L5, B24, D23 etc.), polarity and terminal type must also match. Send us your registration or model on WhatsApp and our team will recommend the right model within minutes.

A correctly chosen SMF battery in regular use lasts 3–5 years on average. Short trips, extreme heat/cold and long idle periods shorten life. A free annual test catches an ageing battery before it strands you.

No — it's not recommended. Start-stop systems generate far more cycles than a standard battery can endure; a standard battery will lose capacity within months and the start-stop function may deactivate. If your car came with EFB, fit at least EFB; if it came with AGM, fit AGM.

In gel batteries the electrolyte is immobilised as a gel: leak-proof, maintenance-free and fully recoverable from deep discharge, with up to 75% more cycling capacity than flooded types. Choose gel for cyclic use (marine, caravan, solar) and flooded/SMF for classic starter duty.